Fascia board replacement
Rotten fascia boards are replaced before new gutters go up so the hangers have solid wood to hold.
Gutter installation in Paramus usually means seamless aluminum gutters formed on site to the exact length of each run, so rain is carried away from the siding and foundation. Call (551) 383-2304 to reach a local roofer.
Gutters have one job: catch the water coming off the roof and send it somewhere harmless. When they are missing, undersized or badly pitched, that water splashes against siding, rots fascia and soffits, erodes landscaping and soaks the soil along the foundation, where it can find its way into a basement or crawl space. Good gutter installation starts with matching gutter size and downspout count to the roof area that drains into each run.
Most new gutters today are seamless aluminum, formed on site from a coil by a gutter machine. With no seams along the run, leaks are limited to the corners and outlets, where they are easier to seal. Copper and steel are options for a different look or extra strength, and vinyl sections are sold for do-it-yourself jobs but tend to sag and crack over time.
Choosing the gutter itself comes down to capacity and style. K-style gutters, with a flat back and a decorative front, are the most common and hold more water than a half-round gutter of the same width. Five-inch gutters handle many homes, but large, steep roofs or long runs often need six-inch gutters and larger 3x4 downspouts.
If the problem goes deeper than it first looked, a Paramus roofer may also recommend gutter guard installation or gutter repair.
Looking for Paramus gutter installation? Call (551) 383-2304 and describe the problem to a roofer who works in Paramus.
Call nowA good gutter job is mostly planning, then careful hanging.
The installer measures each run and the roof area that drains into it, then picks the gutter size and number of downspouts. Outlets are planned for spots where water can be carried clear of walkways and the foundation.
After the old gutters are removed, soft or rotten fascia boards are replaced before anything new goes up. Missing drip edge is added so runoff lands in the gutter.
The gutter machine forms each run in one piece, sized to fit wall to wall. Corners and end caps are fastened and sealed before hanging.
A gentle, consistent slope toward each outlet keeps water moving. Very long runs are often split, pitched toward two outlets.
The gutters are fastened with hidden hangers and screws rather than the old spike and ferrule method. Extra hangers go where the gutter carries the most weight.
Downspouts are attached with straps and elbows, and extensions or splash blocks carry water several feet from the foundation. Then the system is tested with water to check flow and seams.
Rotten fascia boards are replaced before new gutters go up so the hangers have solid wood to hold.
Guards are an option to reduce clogs if trees overhang the roof.
Downspouts are sized and placed to carry the water each run collects so gutters drain quickly in heavy rain.
Gutters are formed from coil to the exact length needed with joints only at corners and outlets.
A gutter apron bridges the gap between roof and gutter which stops rot along the roof edge.
A seamless gutter is made in the driveway on installation day, cut to the exact length of the wall. Sectional gutters, by contrast, are joined every ten feet or so, and every joint is a seam that can drip as the sealant ages. Aluminum coil comes in a range of colors and thicknesses, with heavier gauges standing up better to ladders and limbs.
Most Paramus homeowners choosing new gutters end up with seamless aluminum. Seamless copper suits historic homes, while steel adds stiffness. The installation details matter as much as the gutter itself.
When gutters are rusting through, sagging along whole runs or too small for the roof, replacement beats patching. Rusted seams, brittle vinyl and gutters that overflow even when clean all point toward replacement. Replacing gutters is also a good time to fix fascia rot and add drip edge.
In Paramus, gutter replacement often pairs well with a new roof, since drip edge and fascia can be done at the same time. A replacement can also upsize the system, moving from five-inch to six-inch gutters or adding downspouts where water overflows. A call to (551) 383-2304 is a good way to start planning the replacement.
Around Paramus, new gutters usually go on when old ones start leaking, sagging or overflowing. Across Paramus and nearby communities including Oradell, River Edge, Fair Lawn and New Milford, newer homes often have more roof area and steeper slopes, which can overwhelm standard gutters, so sizing the system to the roof is the most important part of the job.
Need gutter installation around Paramus? Call (551) 383-2304 for a Paramus roofer who serves the towns around it too.
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, which is how ice dams form and back water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. Most homeowners in Paramus, NJ have the roof checked in the fall and again after the snow melts.
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Roofers in Paramus know the roof types and weather wear common in local homes.
Ask the roofer about the cause, the options and the estimate before work starts.
More questions? Call (551) 383-2304
Micro-mesh, screen and hooded gutter guards fitted to clean, properly pitched gutters, mounted without lifting the shingles.
Learn moreFixing gutters that drip at the corners, sag between hangers or pull away from the fascia, so roof water drains where it should again.
Learn moreFixing the fascia that holds your gutters and closes off the rafter ends, so the gutters stay solid and water stays out of the eaves.
Learn moreFull tear-off and replacement for roofs that are worn out, storm beaten or leaking in several places, with the old layers removed and the deck checked.
Learn moreLooking for something else?
See all roofing servicesCall (551) 383-2304 to talk to a roofer serving Paramus, NJ.