Local roofersFree to callNo forms to fill out
Serving Paramus and nearby towns
Menu
Call (551) 383-2304
Tile Roofing

Tile Roof Installation Paramus, NJ

A roofer in Paramus can install a clay or concrete tile roof, starting with a check that the framing can carry the weight and finishing with the flashing, ridge and eave details that keep it dry. One call to (551) 383-2304 reaches a nearby tile installer.

Tile is one of the heaviest roofing materials a house can carry, so a tile roof installation starts below the roof. A tile roof weighs several times as much as asphalt shingles, and a home built for shingles may need an engineer to check the rafters or trusses before switching. New homes designed for tile have the load built in from the start.

Next comes the material. Fired clay is the long lasting classic, while concrete tile is a sturdy, widely available option whose surface color softens with age. Profiles run from flat tiles that look like slate or shakes to S-shaped tile and two-piece barrel tile.

What lasts is the system under the tile. Codes typically allow tile on slopes down to 2.5 in 12, with two layers of underlayment required on slopes under 4 in 12. Investing in the underlayment up front is what lets the tile live out its full life.

Depending on what the roofer finds, tile roof installation in Paramus, NJ can go hand in hand with tile roof replacement and roof installation.

Dealing with this in Paramus, NJ right now? Call (551) 383-2304 to talk to a local roofer.

Call now
The process

How tile roof installation works

Here is how a roofer usually installs a tile roof.

  1. Plan for the load

    The job starts with the structure: span tables or an engineer confirm the framing, and the building permit is secured. Extra tile is ordered so there are matching spares for repairs later.

  2. Dry in the roof

    The deck gets edge metal and underlayment, from heavy felt to synthetic or self-adhered membrane, lapped so water runs over each seam. This is the layer that handles every drop of water that slips past the tile.

  3. Install battens

    Battens are fastened across the roof at spacing set by the tile, and on many roofs counter battens run beneath them so water can drain freely. Some systems skip battens and fasten tile directly, depending on the profile and the slope.

  4. Flash the details

    Wide valley metal, pan flashing at walls and soft metal flashing at pipes are installed so water is carried over the underlayment, not into it. Tile flashing has to reach up and over curved profiles, so it is larger than shingle flashing.

  5. Set the field tile

    Courses are laid from the bottom up, starting over a raised eave or bird stop, and every tile is fastened to resist uplift. Small cut pieces at hips and valleys get extra attention.

  6. Cap the ridge

    Hips and ridges are capped, often with a mechanically fastened system that allows ridge ventilation. Any tile cracked during the job is replaced before cleanup.

What is included

What tile roof installation includes

Tile flashing

Valleys, walls, chimneys and pipes get flashing sized for tile which is where tile roofs usually leak.

Tile fastening

Battens or direct fastening hold every course to meet the wind requirements of the area.

Waterproof layer

Felt, synthetic or self-adhered underlayment is installed lapped to shed water to the eaves.

Structural review

Rafters or trusses are confirmed before tile is ordered so the roof does not sag over time.

Eave closures

Eave and ridge details are finished so birds and wind-driven rain stay out.

Related service

Barrel Tile Roof Installation Paramus, NJ

A barrel tile roof uses two pieces per course, a pan tile that channels water and a curved cover tile that caps each seam. Each tapered tile overlaps the one below it, and the deep shape throws the strong shadow lines that give the roof its look. The open curves at the eaves and ridges must be closed so birds, wind and rain cannot get in.

On a Paramus barrel tile roof, the cover tiles are the ones wind targets, so how they are fastened matters most. Pans and covers have to run in straight lines with even exposure, which takes careful layout before the first pan goes down.

Related service

Spanish Tile Roof Installation Paramus, NJ

Spanish tile, also called S tile, merges the curved pan and cover into one interlocking piece. It comes in clay and in concrete, with colors from terracotta to multi-tone blends. Its interlocking side laps shed water well, but the curved ends at eaves and ridges still need closing off.

A Spanish tile roof on a Paramus home starts with the same foundation as any tile roof: sound framing and a solid underlayment. Where the tile meets walls and chimneys, flashing is shaped to fill the curve without leaving gaps. With a color blend, tile is drawn from several pallets as it goes up so no area looks patchy.

Local help

Tile Roof Installation Near Me

In Paramus, new tile roofs go onto homes of every age, from fresh builds to older houses moving away from shingles. In Paramus and neighboring communities including Oradell, River Edge, Fair Lawn and New Milford, the biggest variable on a conversion is whether the existing framing can carry tile, and storms that bring strong wind make fastening choices as important as the tile itself.

Need tile roof installation around Paramus? Call (551) 383-2304 for a Paramus roofer who serves the towns around it too.

How the weather here affects roofs around Paramus

Cold winters bring snow, ice and a long stretch of freezing nights. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, which is how ice dams form and back water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. Most homeowners in Paramus, NJ have the roof checked in the fall and again after the snow melts.

Why call

Why not wait

Smaller repairs

Small roof problems caught early usually stay small repairs.

Familiar with local homes

Local roofers see the same roofs and storm damage across Paramus and nearby towns.

Clear next steps

Ask your questions before you agree to anything.

Tile Roof Installation FAQ

Which underlayment is best for tile?
Tile roofs use heavy felt, synthetic underlayment or self-adhered membrane, sometimes in two layers. The underlayment usually wears out long before the tile, so a durable one delays the first relay. Codes call for two layers on slopes from 2.5 in 12 up to 4 in 12.
Can my house hold a tile roof?
A tile roof is far heavier than a shingle roof, and concrete tile tends to weigh more than clay. Whether a given house can carry it depends on the framing, which is why conversions from shingles start with a structural review. Lightweight concrete tile is an option for some homes that fall short of the load for standard tile.
Can tile be installed over an existing roof?
A tile roof needs a bare deck, so existing shingles or other roofing are removed. Tear-off exposes the decking so rotted boards can be replaced and the new underlayment can lap correctly.
What is better, clay or concrete tile?
The choice comes down to priorities. Fired clay holds its color, weighs a bit less and has the longest track record. Concrete offers a huge range of styles, but it is heavier than clay and fades as it ages.
How long does it take to put on a tile roof?
Tile goes on slower than shingles, so most homes take one to several weeks. Steep pitches, many hips and valleys and a structural upgrade all add time. Once the underlayment is down, the house is protected from rain while tile goes on.

More questions? Call (551) 383-2304

Other services that may help

  • Tile Roof Replacement

    Full tile roof replacement when the underlayment, fasteners or tile have reached the end of their life, done slope by slope to keep the house protected.

    Learn more
  • Roof Installation

    Putting on a new roof the way the material maker intends, so it sheds water at every edge and seam.

    Learn more
  • Tile Roof Inspection

    An inspection of a tile roof from the ridge to the attic, without breaking tile in the process.

    Learn more
  • Roof Ventilation

    Balancing attic intake and exhaust with soffit vents, ridge vents and attic fans, without mixing vent types that work against each other.

    Learn more

Looking for something else?

See all roofing services

Get tile roof installation help in Paramus

Call now for Paramus tile roof installation and help in the towns around it.

Talk to a local roofer(551) 383-2304Call now

Free to call. No forms to fill out.

Call (551) 383-2304